background image

Damocles2

Ares LTE

21

GPRS/Internet

Use this tab to configure the GSM and internet connection details.

•  

SIM Card PIN

 – specifies the security PIN code for the SIM. The SIM can remain protected with 

the PIN.

•  

Local Informations

 – section to store information about the unit, such as its phone number, or a 

comment. This information does not influence the operation of the device; however, it is sent 
to a master system and can help to identify the device in larger installations. 

  •  

My Phone Number

 – intended for the phone number of the Ares LTE unit. The phone number 

needs to be entered manually because this piece of information is generally not provided 
by neither the SIM nor the network.

  •  

System Note

 – for general use; it may e.g. identify the physical location of the Ares LTE unit 

or the department responsible for managing it. 

•  

Enable GPRS/Internet

 – enables internet-based services, such as sending e-mail, portal servi-

ces and time synchronization. In case the services have been switched off a warning is dis-
played informing about limiting the communication means to SMS only.

•  

GPRS Operator Settings

 – settings for accessing the GPRS network of the mobile carrier:

  •  

APN Address

 – Access Point Name identifier. The default is “internet”.*

  •  

Dial Number

 – phone number for accessing the internet. The default is “*99***1#”.*

•  

Roaming

 – enables internet connection outside of the home carrier network, e.g. when traveling 

abroad.

•  

Show Advanced GPRS Settings

 – displays advanced settings that are accessible directly using 

AT commands (for experts only).

• 

Username

 – user name for the connection.*

• 

Password

 – password for the connection.*

• 

Dialup String

 – AT string.*

• 

Save

 – saves all changes.

*Will be provided by the mobile carrier if needed.

Advanced settings

Summary of Contents for Ares 10 LTE





































Reviews: