Huvema HU 40 FLOWDRILL TOPLINE, Manual

Page: 21 / 22

21
WIJZIGINGEN EN TYPEFOUTEN VOORBEHOUDEN WIJZIGINGEN EN TYPEFOUTEN VOORBEHOUDEN
CE DECLARATION OF CONFORMITY
(in accordance with supplement II A of the Machinery Directive)
Industrie & Handelsonderneming Huberts bv, Kennedylaan 14, 5466 AA Veghel, the Netherlands,
in the capacity of importer, is to be held responsible for declaring that the Huvema machine:
Industrial drilling machine HU 40 Flowdrill topline
which this declaration relates to, is conform the following norms:
NEN-EN-ISO 12100:2010, NEN-EN-IEC 60204-1:2006/C11:2010, NEN-EN-IEC 61000-6-4:2007,
NEN-EN-IEC 61000-6-2:2007
As described in the:
• Machinery Directive: 2006/42/EC
• Low Voltage Directive: 2006/95/EC
• EMC Directive: 2004/108/EC
Veghel, the Netherlands, January 2017
L. Verberkt
Managing Director
Our products are frequently updated and improved. Minor changes may not yet be incorporated in this manual. Always
state the year of build, type and serial number of the machine in correspondence.
Manufacturer and importer assume no responsibility for defects which result from not reading the manual carefully or
wrong use of the machine. No rights can be derived from this manual.
All rights reserved. No part of this booklet may be reproduced in any form, by print, photoprint, microfilm or any other
means without written permission from the publisher.
© Huberts bv, Kennedylaan 14, Veghel, the Netherlands. Internet: www.huvema.nl