Huvema HU 40 FLOWDRILL TOPLINE, Manual

Page: 4 / 22

4
WIJZIGINGEN EN TYPEFOUTEN VOORBEHOUDEN WIJZIGINGEN EN TYPEFOUTEN VOORBEHOUDEN
2. a
ddiTional safeTy rUles
Always keep in mind that:
• the machine must be switched off and disconnected from the power supply during maintenance and repairs,
• clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
Always wear safety glasses!
Thank you for purchasing the industrial milling machine HU 40 Flowdrill Topline. Please read this manual carefully
before operating the machine and keep the operating manual for later reference. This machine is of fine quality and
stable performance. It is equipped with drilling and tapping functions and can be operated for years given regular
maintenance and proper usage. The machine’s structure is driven by gear with high torque which in turn generates
powerful spindle rotation. Controlled by inverter, it is run with variable speed in 2 speed ranges for easy and safe
speed adjustment. In terms of material, the entire machine body including the base、table and column are made by
high-strength casting iron for higher durability.
3. m
acHine
s
pecificaTions
3.1 s
pecificaTion
Motor power 1.5 kW Table dimensions l x w 560 x 470 mm
Tapping capacity M19 Base dimensions l x w 685 x 485 mm
Drilling depth 530mm Weight 340 kg
Spindle taper 100-4000 (Variable) omw/
min
Weight 340 kg
Column diameter 115 mm Voltage 400 V
3.2 m
acHine
d
imension