OVERVIEW
This section is limited to the information needed
to set the Scroll Plus™ Compressor System.
Power supply requirements are found under
“Electrical”; piping, under “Piping”; and charg-
ing, under “Start-up and Maintenance”. Auxiliary
units are found in the sections devoted to them or
in the manuals accompanying them.
SCROLL PLUS™ COMPONENTS
Each Scroll Plus System contains the following:
1. The Scroll Plus System is capable of two tiers
of compressors, with two to four Copeland
scroll compressors in parallel per tier,
equipped with:
a. High and Low Pressure Controls
b. Traxoil Oil Safety Control
c. Primary Overload Protection
2. Factory piping with
a. Suction, Discharge and Liquid Headers
b. Turbashed Oil Separator
c. Vertical Receiver per Tier of Compressors
d. Suction Filters on each Compressor
e. Liquid Drier and Sight-glass
f. Liquid Level Indicator
3. Factory-wired control panel(s) with
a. Pre-wired Distribution Power Block
b. Individual Compressor Integral Breaker /
Contactors
c. Compressor Time Delays
d. Color-coded wiring system
e. Customized wiring diagram
4. Items supplied separately for field installation
a. Liquid Drier Core
b. Vibration Isolation Pads (8)
c. Loose shipped items for accessories.
September 1, 1997
P/N 401789
1 - 1
HUSSM ANN CORPORATION • BRIDGETON, M O 63044-2483 • Printed in USA
INSTALLATION INSTRUCTIONS
Figure 1-1 — Scroll Plus™ Fibertronic™ System
Return to Contents
