6.9
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function:
touch of
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time:
set the
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time:
set the cooking
zone with . Touch or .
To deactivate the function:
set the
cooking zone with and touch . The
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
To stop the sound:
touch .
CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function:
touch of
the timer. comes on. When the
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between and
counted time (minutes).
To see how long the cooking zone
operates:
set the cooking zone with .
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
To deactivate the function:
set the
cooking zone with and touch or
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a
Minute
Minder
when the hob is activated and
the cooking zones do not operate. The
heat setting display shows .
To activate the function:
touch .
Touch or of the timer to set the
time. Cooking zones display deactivates
automatically after 10 seconds. When the
time comes to an end, the sound
operates and
00
flashes.
To stop the sound:
touch .
To deactivate the function:
activate for
a short time and deactivate left front
cooking zone.
The function has no effect
on the operation of the
cooking zones.
6.10
Pause
The function does not stop the timer
functions.
Touch to activate the function.
comes on. The heat setting is lowered
to 1.
To deactivate the function
, touch .
The previous heat setting comes on.
If you change the heat
setting, the function stops
and the display shows the
new heat setting.
6.11
Lock
You can lock the sensors on the hob
while cooking zones operate.
Set the heat setting first.
To activate the function:
touch .
comes on for 4 seconds. The Timer stays
on.
www.husqvarna-electrolux.se
14
Summary of Contents for QSI7134W
