Husqvarna PG 680 RC, Operator'S Manual

Page: 24 / 204

OPERATING
24 – English
Functions menu
Oscillation
This function is used to get the machine to oscillate/swing
during grinding to prevent edges/ridges between passes.
• ON/OFF - activates/deactivates oscillation, for
example when turning the machine. When oscillation
is reactivated, previous settings will be used.
• OFFSET - is used for directional correction of
machine displacement when grinding.
• AMPLITUDE - is used to set how wide the machine
will oscillate.
• FREQUENCY - is used to set how fast the machine
will oscillate.
Explanation of settings
• Oscillation deactivated. Use the arrow keys to
activate.
• Oscillation activated. Press OK to activate setting for
OFFSET.
• OFFSET adjustment. Press the arrow keys to adjust
setting for OFFSET. Press OK to adjust AMPLITUDE.
• AMPLITUDE adjustment. Press the arrow keys to
adjust seting for AMPLITUDE. Press OK to adjust
FREQUENCY.
• FREQUENCY adjustment. Press the arrow keys to
adjust setting for FREQUENCY. Press OK to return to
ON/OFF mode.
Warning indication
The warning triangle comes on and the machine’s
warning lamp flashes faster when the machine detects a
fault. For more information regarding the fault that has
been detected and what action to take, see the
'Troubleshooting' section
NOTICE! There is a delay before this correction comes
into play.
0 SPEED
0
m/s
12:45 Jan 05
0
POWER
OFF
REV FWD
0 SPEED
0
POWER
REV FWD
0 SPEED
0
m/s
12:45 Jan 05
0 POWER
ON
REV FWD
OK
0 SPEED
0 POWER
REV FWD
4 4 1
0 SPEED
0
m/s
12:45 Jan 05
0 POWER
ON
REV FWD
OK
0
SPEED
0 POWER
REV FWD
4 4 1
NOTICE! Pay attention to the oscillation when the
machine is running close to walls and edges. DISABLE
oscillation when turning the machine or grinding near
protruding objects.
0
SPEED
0
m/s
12:45 Jan 05
0 POWER
ON
REV FWD
OK
0 SPEED
0 POWER
REV FWD
4 4 1
0 SPEED
0
m/s
12:45 Jan 05
0 POWER
ON
REV FWD
OK
0 SPEED
0 POWER
REV FWD
4 4 1
0
SPEED
0
12:45 Jan 05
0
POWER
REV FWD
0
SPEED
0
POWER
REV FWD
OFF