Husqvarna MZ5225ZT / 966690501, Operator'S Manual

Page: 33 / 64

1
2
OPeRaTION
33
WARNING!
No adjustments or maintenance
should be carried out unless:
the engine stopped •
the ignition key removed •
the parking brake activated •
Manual Transport
8065-061
1. IZt locked into the bypass position
2. Linkage lever, engaged
Right side, IZT linkage
When pushing or pulling the mower, engage the IZt
(Integrated Zeroturn transaxle) bypass linkages. the
linkages are located on each side of the rear of the
unit below the rear engine plate.
Raise the deck to the highest (transport) position.
Pull the bypass linkages up and out of the keyhole
slots. Release the lever with the head outside the
bracket and held into the bypass setting.
to reengage the IZts to drive, reverse the above
procedure.