42 - English
Bar bolt
19.1 Dismantling
1. Drain the oil tank.
2. Knock through the old guide bar bolts so that they
fall into the oil tank. See Figure 1.
3. Remove the bolts from the oil tank. See Figure 2.
19.2 Cleaning and inspection
Clean and inspect all parts.
19.3 Assembly
1. Secure steel wire to the outer part of the new bar
bolt, thread the steel wire through the oil tank and
out through the bolt hole. See Figure 3.
2. Pull the steel wire so the bolt comes out of its hole.
See Figure 3.
3. Check that the bolt’s square head fits in the washer
which is positioned inside the oil tank.
4. Pull out the bar bolt using its nut. Place two spacer
between the nut and chain guard plate. See Figure
4.
5. Refill with chain oil.
19 Bar bolt
Fig. 1
Fig. 2
Fig. 4
Fig. 3
