Husqvarna F1103V5, Owner'S Manual

Page: 91 / 133

ELECTRICAL SYSTEM 15
89
15.5 Changing the ABS fuses
Info
Two fuses for the ABS are located under the protection cap next to the fuse box. These fuses protect
the return pump and the hydraulic unit of the ABS. The third fuse, which protects the ABS control unit, is
located in the fuse box.
Preparatory work
–
Remove the passenger seat. ( p. 54)
–
Remove the front rider's seat. ( p. 55)
F03803-10
To change the fuse of the ABS hydraulic unit:
–
Take off the protection cap and remove fuse
1
.
Info
You can recognize a faulty fuse by a burned-out
fuse wire
A
.
Warning
Fire hazard
Incorrect fuses overload the electri-
cal system.
–
Only use fuses with the required ampere
value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) ( p. 116)
Tip
Insert spare fuse
2
in the fuse box so that it is
available if needed.
–
Mount the protection cap.
F03803-11
To change the fuse of the ABS return pump:
–
Take off the protection cap and remove fuse
3
.
Warning
Fire hazard Incorrect fuses overload the electri-
cal system.
–
Only use fuses with the required ampere
value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088015) ( p. 116)
Tip
Insert spare fuse
4
in the fuse box so that it is
available if needed.
–
Mount the protection cap.