Husqvarna F1103V5, Owner'S Manual

Page: 105 / 133

SERVICE WORK ON THE ENGINE 18
103
F02870-10
–
Remove screws
3
. Take off oil filter cover
4
with the O-
ring.
–
Pull oil filter
5
out of the oil filter housing.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surface.
F02871-10
–
Insert new oil filter
5
.
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
4
.
–
Mount and tighten screws
3
.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
F02872-10
–
Remove filler plug
6
with the O-ring, and fill up with engine
oil.
Engine oil
Ambient tempera-
ture: 0 … 50 °C (32
… 122 °F)
1.5 l (1.6 qt.) Engine oil (SAE
15W/50)
( p. 121)
Engine oil
Ambient tempera-
ture:
−
10 … 40 °C
(14 … 104 °F)
Engine oil (SAE
10W/40)
( p. 122)
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning
Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check it for leaks.
Finishing work
–
Fit the front spoiler. ( p. 63)
–
Check the engine oil level. ( p. 102)