38
13. Technical data
NOTE:
The following tables contain only the technical data required for standard
acceptance.
Additional data concerning your unit can be obtained from HURST on request.
The limitation of the max. fill quantity of the hydraulic tank results from the
"operability at an incline" prescribed in the standards.
Because all values are subject to tolerances, there may be small differences between the
data for your device and the data in the following tables!
The values may also differ because of reading inaccuracies and/or tolerances in the
measuring equipment used.
13.1 Power Unit
1
3.1.1 Basic dimensions of the power unit (mm [inch])
Power unit P 630 SG:
Summary of Contents for P 630 SG
Page 42: ...42 14 Notes...
Page 43: ...43...
