36
Fault
Check
Cause
Solution
Fluid coming out
from hydraulic fluid
tank
Connected unit
not in base
position yet and
fluid coming out of
filler cap?
Return of the hydraulic
fluid from the rescue
device exceeds the
tank’s maximum
quantity when filled.
Reduce fluid level in
the hydraulic tank to
“Minimum” mark, move
the unit to the base
position and then fill
back up with hydraulic
fluid to the “Maximum”
level
Fluid leaks from a
different location?
Leak from tank, lines or
seals
Replace defective
components or repair
by authorised dealer or
HURST directly
Leaking fluid
between engine and
flange bearing
Radial shaft seal on the
drive shaft is defective
Have repaired by
authorised dealer or
directly by HURST
Hydraulic fluid milky
and cloudy
Water / condensation in
the system
Replace the hydraulic
fluid immediately
Hoses cannot be
coupled
Coupling defective
Coupling must be
replaced immediately
Summary of Contents for P 630 SG
Page 42: ...42 14 Notes...
Page 43: ...43...
