28
NOTE:
Non-observance of the maintenance plan can lead to malfunctions that are not
covered by the warranty.
For dismantling the sparking plug, use a commercially-available sparking plug
spanner with universal joint and spanner size of 16 mm (5/8 inch).
A straight/rigid sparking plug spanner would damage or break off the sparking
plug!
(also observe the separate instructions from the engine manufacturer)
First month or after the first 20 hours (first time):
• Replace engine oil (see operating instructions of the engine manufacturer).
You must conduct the following service measures every
50 operating hours
:
• Clean the air filter element.
• After using in a dusty environment, inspect the air filter element and clean immediately,
if necessary.
You must conduct the following service measures every
100 operating hours
:
• Replace engine oil.
• Check the sparking plug, clean if necessary / set the electrode gap of the sparking plug
You must conduct the following service measures every
200 operating hours
:
• Replace the sparking plug
• Replace air filter
(The following service work should be executed by an authorised dealer, HURST directly or
the engine manufacturer.)
You must conduct the following service measures every
300 operating hours
:
• Replace the sparking plug and the filter element
• Clean and adjust the carburettor, valve clearance, valve seat and cylinder head.
You must conduct the following service measures every
1000 operating hours
or
every
2 years
:
• Check the starter
• Inspect the engine for damage
• Check the fuel line and replace, if necessary.
11.3 Additional service work
Summary of Contents for P 630 SG
Page 42: ...42 14 Notes...
Page 43: ...43...
