Chapter4
Transport, Putting into Operation and Decommissioning
Page16
Transport
Mobile bain marie
SPA/K-2DW | SPA/K-3DW
4330036_A1
4
Transport, Putting into Operation and Decommissioning
4.1
Transport
ATTENTION
Appliance damages caused by improper transport
In the case of off-site transport in a vehicle such as a lorry, the appliances
should be secured properly. The total brakes are not sufficient as a transport
securing method.
If the appliances are not secured properly, there is a risk of damage to proper-
ty and persons caused by squashing.
During transport, secure all the individually standing appliances using corre-
sponding transport securing devices.
ATTENTION
Appliance damages caused by improper transport
The mobile bain marie should be transported upright, since spilt coolant can
damage the cooling element.
The mobile bain marie must stand on the casters when it is transported.
ATTENTION
Appliance damages
After transporting or storing the appliance horizontally, keep it in a vertical
position for some time, so that the coolant can flow back into its initial position.
Wait at least for about 2 hours before you put the appliance into operation.
The mobile bain marie is delivered as an assembled unit, i.e. it is completely assembled including the cooling
element.
When loading, use only hoists and load lifting devices approved for the weight of the mobile bain marie. Only
transport vehicles that are approved for the weight of the appliance may be used.
The scope of delivery is specified in the shipping documents in accordance with the valid purchase agree-
ment and included with the delivery item.
4.2
Putting into Operation
DANGER
Hazardous electrical voltage
The electrical voltage may be considerably dangerous to limb and life of per-
sons and lead to injuries.
Before putting the appliance into operation check, whether the power supply
indicated on the rating plate (230V / 50Hz) corresponds to the local power
supply. Otherwise, do not put the appliance into operation.
Do not use any extension leads in wet areas.
ATTENTION
Appliance damages
After transporting or storing the appliance horizontally, keep it in a vertical
position for some time, so that the coolant can flow back into its initial position.
Wait at least for about 2 hours before you put the appliance into operation.
Remove the original packing and check, whether the appliance is complete and undamaged. Do not put a
defective appliance into operation under any circumstances and inform the supplier immediately in such
cases.
