Chapter2
Safety Instructions
Page10
Safety Instructions for Transport
Mobile bain marie
SPA/K-2DW | SPA/K-3DW
4330036_A1
§
Moving it over inclined planes or steps is not permitted.
§
When approaching walls and moving round obstacles, always watch out for persons in your path.
Risk of injury.
§
When moving the appliance, always hold both handles with your hands. Never let go of the appliance
while moving it.
§
When transporting the appliance, do not move it faster than a walking pace. Heavily laden appliances
are difficult to brake and steer. If necessary, ask for assistance.
§
If the mobile bain marie tips over due to outside influence or inattention, never catch it manually. Risk
of injury.
§
In the case of off-site transport in a vehicle such as a lorry, the appliances should be secured proper-
ly. The total brakes are not sufficient as a transport securing method.
§
Do not stop the appliance by applying the total brakes. The total brakes are designed to be able to
prevent the appliance from unintended moving. Do not stop the appliance on sloping floors. Secure
the appliance against rolling away by applying both total brakes when stopping it.
§
Before transporting, switch off the appliance using the On/Off switch, pull out the mains plug and in-
sert it into the holder provided.
§
Forceful straining of the connecting lead can lead to damage to the internal line. Risk of fire.
§
Never pull the mains plug out of the socket by the connecting lead. The standard models of
HUPFER®
appliances are equipped with a Schuko® angle plug. In contrast to a straight Schuko®
plug this plug only sticks insignificantly out of the socket and so cannot be damaged by being hit at
the side. If the appliance is moved without pulling out the mains plug beforehand, the socket can be
severely damaged or even pulled out from the wall as a result of leverage arising from overstretching
of the connecting lead.
§
Never move the appliance by pulling by the connecting lead.
§
If the mains plug has come into contact with water it must be dried before inserting it into the socket.
Danger to life.
§
Damaged mains plugs or the connecting lead are to be replaced by authorised specialists before the
appliance is used.
§
Do not use any extension leads in wet and damp areas.
§
Only insert mains plugs into suitable sockets. If the mains plug does not fit, the connecting lead of the
appliance is to be retrofitted by authorised specialist staff.
§
The use of socket adapters is not permitted. Risk of fire.
§
A temporary storage lasting longer than three months must take place in a dry and frost-free envi-
ronment. The appliance must be kept covered with a suitable covering material to be protected
against dust ingress.
2.4
Safety Instructions for Transport
The following points are to be observed when transporting the mobile bain marie:
§
When loading, use only hoists and load lifting devices approved for the weight of the appliance to be
lifted.
§
Use transport vehicles that are approved for the weight of the mobile bain marie.
§
Do not put a defective appliance into operation under any circumstances and inform the supplier im-
mediately in such cases.
§
If possible, transport the appliance upright, i.e. standing on the casters. If this is not possible, the ap-
pliance must be set upright for two hours before putting it into operation, so that the coolant can flow
back into its initial position.
