- 4 -
ASSEMBLE INSTRUCTION
Before assembling, you should remove the components from the box and make sure all the
parts have been supplied fully according to the product. Assembly instructions are described in
steps and illustrated below:
1. Foot tube installation.
Use carriage screw (12), washers (13), cap nuts (17) to connect the front foot tube (7) and the
frame (1) as shown in the figure, and the rear foot tube is assembled in the same way.
Notes: The front foot tube with a moving pulley, and the rear foot tube without moving pulley.
2. Pedal Installation.
Install and lock the two pedals (18) tightly with open-ended wrench as shown in the figure.
Note: Both pedals are tightened towards the armrest.