- 6 -
MONITOR FUNCTION DECRIPTION
Display parameters:
Time, Speed, Distance, Odometer, Calories, Pulse.
Time .......................................................................................................................... 00:00-99.59
Speed ...................................................................................................................... 0-99.9 Km/h
Distance ..................................................................................................................... 0-999.9 Km
Odometer .................................................................................................................. 0-999.9 Km
Calories..................................................................................................................... 0-999.9 Kcal
Pulse ......................................................................................................................... 40-240 BPM
KEY FUNCTIONS
MODE:
This key lets you to select and lock on to a particular function you want.
OPERATION PROCEDURES
1. Auto On/Off.
The system turns on when any key is pressed or when it receives an signal input from the
speed sensor.
The system turns off automatically when the sensor has no signal input or no key are pressed
for approximately 4 minutes.
2. Reset
The unit can be reset by either changing battery or pressing the mode key for 3 seconds.
3. Mode
To choose SCAN or LOCK if you do not want the scan mode, press the MODE key when the
pointer on the function you want which begins blinking.
4. Functions
TIME:
Press the MODE key until the pointer advance to
“TIME”. The training time will be
displayed when you start the workout.
SPEED:
Press the MODE key until the pointer advance to
“SPEED”. The display will show the
current speed during exercise.
DISTANCE:
Press the MODE key until the pointer advances to
“DISTANCE”.The distance of
each workout will be displayed.
ODOMETER:
Press the MODE key until the pointer advances to
“ODOMETER”. The total
accumulated distance will be shown.
CALORIES:
Press the MODE keyuntil the pointer advance to
“CALORIES”. The calories burned
will be displayed.
PULSE:
Press the MODE key until the pointer advance to
“PULSE”. User's current heart rate wil
be displayed in beats per minute.
Place the palms of your hands on both of the contact pads, and wait for 30 seconds for the most
accurate reading.
SCAN:
Automatic display of the following functions in the order shown: TIME
– SPEED -
DISTANCE
– ODOMETER – CALORIES.
