Huntleigh Smartsigns Compact SC1000, Instructions For Use Manual, Page: 5 / 84

5
Quality R
eliability and Safety
Do not use this equipment in the presence of flammable gases.
Do not immerse any part of the equipment in any liquids.
Do not use solvent cleaner on any part of the system.
Do not use high temperature sterilising or E-beam / gamma
sterilisation processes.
This product contains sensitive electronics; strong radio
frequency fields could interfere with the operation of the
system. In the event where this occurs, we suggest that the
source of interference is identified and the equipment is
used 'out of range'.
Do not destroy packing, either retain for future use or return to
supplier.
If any doubt exists concerning the use of this equipment, an
alternative method should be used.
Possible
Equipment
Damage Do not immerse any portion of the instrument in water.
Fluid spills may damage the instruments electrical
components.
Do not sterilise this product. Sterilisation environments
can cause severe damage.
Do not autoclave or gas sterilise accessories unless
manufacturer instructions clearly approve it.
Possible
Safety Risk Do not substitute accessories. Use only
recommended accessories listed in this manual.
Substitution may cause the instrument to work
improperly. The correct accessories are shielded to
prevent conductive parts of the electrodes contacting
other conductive parts or earth.
Warning When several pieces of equipment of various origins
are interconnected, they should comply with
EN60601-1-1. Any equipment connected should
comply with EN60601-1, EN60950, EN60065,
EN60335 or EN61010.
Warning The accuracy of the readings obtained from this
equipment may be affected by the presence of a
pacemaker or cardiac arrhythmia.