Huntleigh Smartsigns Compact SC1000, Instructions For Use Manual, Page: 19 / 84

19
Operation
Press the ON/OFF button on the front panel once to set the
unit into Standby Mode.
The Amber LED will flash whilst the unit is in Standby Mode.
Press the ON/OFF button once again to exit Standby Mode
and switch the unit ON.
9.2.1 Setting the unit to Standby
Press and hold the front panel ON/OFF button for 4 seconds
- the unit will switch off.
9.2.2 Switching the unit OFF
Enabling / Disabling the Touch Screen
Above the command bar is an area
reserved for the patient's name,
identification number and system
messages.
JONES
123456-A
The touch screen may be locked / un-locked by pressing
the padlock icon in the bottom right hand corner of the
screen.
Patient information and system settings are saved in
the systems memory when the unit is switched OFF.