HunterDouglas Pirouette EasyRise, Installation Operation Care

Page: 13 / 24

INSTALLATION
11
■ ■
Gently pull out the bumper and threaded connector until
it is visible.
■ ■
Slide the bumper away from the threaded connector.
CAUTION: Do not grip the bumper on top of the
connector and attempt to screw on the wand at this
point. Secure attachment of the wand cannot be
guaranteed if tightened by hand.
■ ■
Hold the threaded connector with a
5
⁄
16
" (8 mm) open end
wrench, and screw the hollow end of the wand onto the
threaded connector, as shown. If necessary, pliers can be
used instead of a wrench.
■ ➤
Continue to firmly rotate the wand until you feel it
click two times and the wand stops moving. This
ensures the wand is securely attached.
CAUTION: If the wand is not properly secured, it will
come loose after repeated use.
■ ■
Slide the bumper back onto the threaded connector.
■ ➤
Make sure the bumper is properly aligned and
seated tightly on top of the threaded connector.
NOTE: The underside of the bumper matches the
shape on the top of the threaded connector.
■ ■
Gently release the wand.
Bumper
Connector
Aligned