HunterDouglas Pirouette EasyRise, Installation Operation Care

Page: 12 / 24

INSTALLATION
10
Attach the Universal Cord Tensioner (UCT) — EasyRise
™
Only
IMPORTANT:
Before you proceed, you must first slide
the cord tensioner to the bottom of the cord loop.
■ ■
Insert a small screwdriver, punch, or awl through the
screw hole at the bottom of the cord tensioner.
■ ■
Move the screw hole down to the indicator line to
release the safety mechanism.
■ ■
Slide the cord tensioner down to the bottom of the
cord loop.
■ ■
Attach the cord tensioner according to the
instructions provided with the
Universal Cord
Tensioner Installation Kit .
WARNING: It is imperative that the cord tensioner be properly secured to
the wall or window frame to reduce children’s access to the cord loop. Young
children can strangle in cord loops. They can also wrap cords around their necks
and strangle.
CAUTION: The shading will not operate properly unless the cord tensioner is
secured. A Universal Cord Tensioner Installation Kit has been included with your
shading. Follow the instructions in the kit to correctly secure the cord tensioner.
Attach the Wand — UltraGlide
®
Only
The wand must be securely attached to the shading for proper operation.
■ ■
Remove the orange shipping clip.
■ ➤
Grab the edge of the shipping clip and pull straight down.
■ ■
Remove the wand from its packaging.
Screw
Hole
Indicator
Line