HunterDouglas Pirouette EasyRise, Installation Operation Care

Page: 11 / 24

INSTALLATION
9
Install the Shading
IMPORTANT:
Leave the protective film on the fabric-covered headrail until you are satisfied
with the installation of your shading.
■ ■
Position the shading so
that the front faces you.
■ ■
Slide the headrail into the
installation brackets so the
edge of the headrail is between
the lever and the bracket, as shown.
■ ■
Firmly push the headrail into each bracket until it clicks
and the lever snaps to the right side of the bracket.
IMPORTANT: Carefully pull on the headrail at each bracket
to ensure it is installed securely.
■ ■
Remove the protective film from the fabric-covered headrail.
Attach the Dust Cover (Optional for Outside Mount)
The dust cover is used to protect the top of the headrail from exposure on outside mounted
shadings.
■ ■
Cut the dust cover to desired width.
■ ■
Remove the paper backing on one side of the hook and
loop fastener dots.
■ ■
Apply the dots to the installation brackets on each end of
the shading.
■ ■
Remove the remaining paper backing from the dots.
■ ■
Center the dust cover over the top of the shading, above the previously placed dots.
■ ■
Press the dust cover down onto the dots.
Headrail
Installation
Bracket
Lever
Slide the Headrail
Between the Lever
and the Bracket
Remove
Paper
Backing
Overhead View — No Dust Cover
Dots
Dust Cover Installed