INSTALLATION
7
■
■
Center the installation brackets or extension brackets on your marks and mark the location
of the screw holes.
■
➤
A minimum 1" flat vertical surface is required for the installation brackets. Extension
brackets require 1
1
⁄
4
".
■
➤
The tops of the installation brackets or extension brackets should be at the desired
height. The brackets should be level and aligned.
CAUTION:
The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION:
Use drywall anchors
when mounting into drywall.
■
■
Attach the installation or extension
brackets using the screws provided.
IMPORTANT:
The tops of the
installation brackets or extension
brackets must be level with their
front edges aligned.
■
■
If using spacer blocks, attach the spacer block(s)
and installation bracket to a flat vertical mounting
surface with #6 screws long enough for a secure
installation.
IMPORTANT:
Do not add more than 1
1
⁄
2
" of
clearance using spacer blocks.
IMPORTANT:
The tops of the installation brackets
must be level with the front edges aligned.
1
1
∕
2
"
Maximum
Spacer
Blocks
Longer
Screw
1"
Extension
Bracket
1
1
∕
4
"
Summary of Contents for Pirouette EasyRise
Page 23: ......
