HunterDouglas Pirouette EasyRise, Installation Operation Care

Page: 17 / 24

OPERATION
15
Troubleshooting
Problem
The shading will not snap into the installation brackets.
Solution Check that the installation brackets are level. Shim to level, if necessary.
Check that the headrail is completely inserted into the installation brackets.
See “Install the Shading” on page 9.
Problem The EasyRise
™
cord tensioner has climbed to the headrail.
Solution
Pull down on the spring to relieve tension and
pull the cord tensioner to the bottom of the
cord loop. Then properly mount the cord
tensioner. See “Attach the Universal Cord
Tensioner (UCT) — EasyRise
™
Only” on page 10
and/or the instructions included with your
Universal Cord Tensioner Installation Kit .
Problem
The EasyRise cord tensioner grabs onto the cord when the cord is pulled.
Solution Check that the universal cord tensioner is mounted properly. Reinstall, if
necessary.
Problem
The shading is hard to raise or lower, or will not raise or lower.
Solution Check that there is clearance between the ends of the shading and the
window casement on inside mounts.
Check that the universal cord tensioner is mounted properly. Reinstall, if
necessary.
Check that the installation brackets are level. Shim to level, if necessary.
Check if the fabric rolls up evenly into the headrail. If not, see “Adjusting the
Bottom Rail Weight” on page 16.
If hold-down brackets are used, make sure they have been released.
Screw
Hole
Indicator
Line