Hunter TCX575 Operation Instructions Manual Download Page 48

Page: 48 / 48

Hunter Research and Training Center

www.Hunter.com

HUNTER TRAINING

Hunter operates the most advanced, up-to-date Training Center in the industry today.
The courses have been designed to meet the needs of new and experienced technicians who want to

increase their mechanical and diagnostic capabilities. The low student-teacher ratio (average 7 to 1) and

the emphasis on “hands-on” training (70% time in shop) create an excellent learning environment.
Highlights of the Hunter Training Center include:

An instruction staff with years of shop, field, and teaching experience.

Fully-equipped service bays.

Classrooms equipped with modern teaching aids.

The most up-to-date wheel alignment, balancing service, and brake equipment on the market today

Classes Available

Align 1

(Basic Alignment Theory and Practice) - 3 day / 24 hours

Align 2

(Advanced theory / Aftermarket Adjustment) - 2 day / 16 hours

Align 3

(Advanced Diagnostics and OEM Procedures) - 2 day / 16 hours

Performance Tire

(Basic and Advanced Tire Changing) - 1 day 8 hours

Road Force® / GSP9700 Certification

- 2 day / 16 hours

Rolling Smooth

(Basic & Advanced vibration theory) - 1 day / 8 hours

Heavy-Duty Truck Alignment 1

(Fundamental Alignment) - 3 day / 24 hours

Heavy-Duty Truck Alignment 2

(Advanced Alignment) - 2 day / 16 hours

Summary of Contents for TCX575
















































Search results

Summary of Contents for TCX575

Reviews:

Related manuals for TCX575

Brands by name

Popular brands

Hunter TCX575, Operation Instructions Manual

Search results

Summary of Contents for TCX575

Reviews:

Related manuals for TCX575

Brands by name

Popular brands