manualshive.com logo in svg

Hunter TCX575, Operation Instructions Manual

The Hunter TCX575 is a versatile tire changer designed for efficient operation in automotive service centers. Maximize your productivity with this reliable equipment by getting the most out of it using the comprehensive Operation Instructions Manual. Download the manual for free from our website to ensure seamless usage.

Share
Download
background image

 

34 

 4. Maintenance, Calibration and Replacement Parts 

Operation Instructions for TCX575 Tire Changer 

3.  Fully tighten the adjustment screws starting with the head retaining bolt. 

Release the post and reposition the tool head on the rim for gap 
adjustment. 

Adjusting the Vertical Gap 

1.  Reposition the tool head on the rim and lock it in place with the head 

position lock. Using a feeler gauge, check the distance between the tool 
head and the rim. The distance should be .06 inch. 

 

.06 inch 

GAP 

 

2.  If the gap is not correct, release the head position lock and adjust the nut 

beneath the post locking system cover to adjust the gap. The cover must 
be removed. Back off the nut to increase the gap and tighten to reduce 
the gap. 

 

POST 

LOCKING 

SYSTEM 

COVER 

ADJUSTMENT 

NUT 

 

3.  Reposition the tool head on the rim and lock it in place with the head 

position lock. Re-check gap. 

Adjusting the Horizontal Gap 

1.  Release the tool head, then reposition it on the rim and lock it in place 

with the head position lock. 

Summary of Contents for TCX575

















































Reviews:

No comments

Related manuals for TCX575

Butts of Bawtry TCS0022 User Instructions & Parts List preview
TCS0022
Brand: Butts of Bawtry Pages: 22

Brands by name

Popular brands

Load more brands