Hunter TCX575, Operation Instructions Manual

Page: 12 / 48

4

1. Getting Started Operation Instructions for TCX575 Tire Changer
Throughout this manual, control pedals are referred to by the associated symbol.
TABLE ROTATION SHOVEL
(non PowerOut)
CLAMP
COLUMN
ROTATION
1.4 Wheel Rotation Pedal
Step down on the rotation pedal to rotate the wheel
clockwise
.
Release the pedal to stop rotation. Depressing the pedal halfway rotates
the wheel at slow speed. Depressing the pedal all the way rotates the
wheel at fast speed.
Lift up on the pedal to rotate the wheel
counterclockwise
. Release the
pedal to stop rotation.
1.5 Tire Bead Breaker Shovel Pedal (Non-PowerOut versions)
WARNING: Keep arms and legs from between the bead breaker arm
and the side of the housing.
Step down on the bead breaker shovel pedal to close bead
breaker arm and loosen bead.
Release the pedal to allow the bead breaker arm to open.
1.6 Tire Bead Breaker Shovel - PowerOut Versions
WARNING: Keep arms and legs from between the bead breaker arm
and the side of the housing.
The PowerOut system provides bead breaking controls on the handle for
convenience, particularly with larger diameter assemblies.
Press the "In" button to close bead breaker arm and loosen bead.
Press the "Out" button to allow the bead breaker arm to open.