Hunter AutoComp Elite, Operation Instruction Manual, Page: 8 / 33

4 GETTING STARTED
The lathe is intended for use on all grounded supply cir -
cuits having a nominal rating of 110 volts AC in the
United States and Canada. The lathe has a grounding
plug. Do not use adaptors that allow you to bypass
required equipment electrical grounding.
The international version of the ACE lathe is intended to
be used with 220 volts of AC.
Optional 220v Power Source (US & Canada)
The lathe can also be connected to a power source that
will apply 230 VAC (208 VAC - 240 VAC) 50/60 Hz
between the supply conductors of the power cord. This
will require conversion to 220 V and the plug, 42-36-2, to
be installed. Refer to Form 7299-T, AutoComp Elite®
Installation Instructions, for information on converting to
220 V. This conversion must be performed by a certified
Hunter representative only.
The power cord utilizes a twist lock connector, Nema L6-
20P. The receptacle may need modification to allow the
proper connection of the power cord. Any modification to
the receptacle should be done by a certified electrician.
Export ACE Lathes 220v Power Source
Excluding Canada, lathes built for export are meant to be
connected to a power source that will apply 230 VAC
(208 VAC - 240 VAC) 50/60 Hz between the supply con -
ductors of the power cord.
1.4 ACE Series Specifications
A protective ground connection, through the
grounding conductor in the power cord, is
essential for safe operation. Use only a power
cord that is in good condition.
Maximum Rotor Turning
Diameter 15.75 inches (400 mm)
Maximum Rotor Thickness 2.75 inches (51 mm)
Maximum Rotor Friction
Surface Area 3.00 inches (76 mm)
Feed Distance 4.3 inches (110 mm)
Spindle Revolutions Variable Speed 0-150 RPM
forward and reverse
Motor Power 1.5 HP (1.12 kw) @ 3450 rpm
Dimensions 27 inches Long x 20 inches
Wide x 15 inches High (686 mm
x 508 mm x 381 mm)
Net Weight Approximately 90 lbs. (41 kg)
(Without trolley)
Lubrication Gear box, AGMA #8 Gear
Lubricant
Carriage slides, light motor oil
Carriage screw, EP grease
Electric Power
Domestic: US & Can
115 VAC, 60 Hz, 15 Amp,
NEMA L5-15P
(230 V, 50-60 Hz optional)
Export:
230v, 50-60hz, 17 amp NEMA
L6-20p