6
Metal Enclosure Installation
Wall-Mount Com Module Installation, Continued
1. Remove the hole plug from the top center of the enclosure.
2. Clean the antenna mounting area with the supplied wipes. Surface must
be free of dirt and dust.
3. Remove the nut from the antenna threads.
4. Peel off the protective cover on the antenna bottom to expose the
adhesive.
5. Route the antenna cables down through the hole into the controller. Then
press the antenna into place.
6. Route the antenna cables through the antenna nut and secure the nut
onto the antenna threads. Do not overtighten.
7. Apply the RTV sealant around the hole, filling the gap between the
enclosure hole and the mounting threads.
8. Route the antenna cables through the recessed track in the door frame
to the module. Connect the antenna cable connectors to the module.
Summary of Contents for ACC-COM-LTE
Page 15: ...15 Notes ...
