5
Metal Enclosure Installation
Additional Steps if UHF Radio Is to Be Installed:
(ACC-COM-LTE only)
If the Com module will be used with a RAD3 radio, the radio ribbon cable
should be connected to the Com module now, before installing the
ACC-COM-LTE into its compartment.
• The radio ribbon cable has a rectangular 14-pin connector on one end for
the Com module, and a DB-15 connector on the other end for connection
to the radio. The 14-pin connector only plugs one way, and is keyed to
assist proper orientation. Align the connector and push into place on the
top of the Com module.
• When the Com module is installed in the opening, make sure that the
ribbon cable is visible on the back of the unit, for connection to the RAD3
radio module.
Radio ribbon cable
Antenna cable track
Back of Facepack Door
Summary of Contents for ACC-COM-LTE
Page 15: ...15 Notes ...
