INSTALLATION
6
Mount the Installation Brackets — Outside Mount
IMPORTANT:
Spacer blocks are recommended to project the installation brackets away from
the mounting surface for rear fabric clearance. Add
3
/
4
" for standard Tiered
™
or 1" for Tiered
Architella
®
.
■
Center the shade over the window opening at the desired height. Use a pencil to lightly mark
each end of the headrail on the mounting surface.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■
Mark 2" from each end of the headrail.
➤
If more than two installation brackets came with your order, space them evenly between
the two end brackets and mark their location. Mount into wood whenever possible.
■
Center the brackets on your marks, then mark each of the screw holes.
➤
A minimum 1" flat vertical surface is required to mount the brackets.
➤
The top of the installation brackets or extension brackets should be at the desired shade
height. The brackets should be level and aligned.
➤
When using extension brackets, mark two screw holes per bracket.
CAUTION:
The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
Headrail End Marks
Window Opening
2"
2"
Space Evenly
Space Evenly
Headrail
End Mark
2"
Summary of Contents for Vignette EasyRise
Page 47: ......
