INSTALLATION
10
Attach the Magnetic Hold-Down Brackets (Optional)
■
Lower the shade until it is fully lowered.
■
Attach the magnetic hold-down bracket onto the bottom rail just
inside the end cap, oriented as shown.
■
Mark the screw location using one of the mounting options shown
below.
➤
The screw should be placed in the middle of the channel. This
will allow for adjustment.
■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust the bracket height by loosening the screw and
sliding the bracket up or down.
Hold-Down
Bracket
End
Cap
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust the
bracket
using the
channel.
Summary of Contents for Vignette EasyRise
Page 47: ......
