INSTALLATION
17
■
Route the three cords
with individual cord anchors
attached through the stop
plate. A single cord is shown in
the illustration for clarity.
1)
Slide the cords from the trike up the
angled back slot of the split stack stop plate,
positioning them into the circular holder.
2)
Slide the cords up the front channel so that
they exit the smaller circular hole in the front
of the stop plate.
3)
Secure the three cord anchors to the front channel as
described in the following procedure.
■
Secure the three cord anchors attached to the individual cords routed through the stop
plate. Be sure that the cords are not twisted before beginning.
➤
Start with the cord anchor that has the shortest cord. Hook the anchor between the first
set of marks closest to the stop plate and secure it using the Allen wrench.
➤
Install the cord anchor with the next shortest cord in a similar manner.
➤
Finally, install the cord anchor with the longest cord.
IMPORTANT:
Make sure that the cords do not twist together.
Proceed to “Complete the Installation” on page 18.
Cords
from Trike
3
1
2
Marks
Front
Channel Cord
Anchor
Bottom View
Front Channel
Bottom View
3
1
2
Summary of Contents for Vignette EasyRise
Page 47: ......
