OPERATION
27
Problem
SimpleLift
™
with PowerView
®
blinds only:
The bottom rail is not level or
the blind height is incorrect.
Solution
Check that the headrail and installation brackets are level and aligned. Adjust
and/or shim the installation brackets to level, if necessary.
Level the Bottom Rail or Correct Blind Height:
NOTE:
All skew adjustment features are located under the headrail.
■
■
To level the blind, raise the low side
of the bottom rail by turning the skew
adjustment feature on the headrail
clockwise with a coin or screwdriver,
while lifting the weight from the
bottom rail.
NOTE:
Turn the skew adjustment that
is on the same side as the low side of
the bottom rail.
■
■
If the blind height is too long, turn all of the skew adjustment features
clockwise to raise the entire bottom rail to the desired height while lifting
the weight from the bottom rail.
Problem
SimpleLift with PowerView blinds only:
The blind makes a ratcheting noise
while the center button is pushed in and the bottom rail is being raised.
Solution
Push harder on the center button. The button must be fully depressed to raise
or lower the blind.
Summary of Contents for PowerView
Page 34: ...Notes ...
Page 35: ......
