Hunter Douglas PowerView, Installation Operation Care

Page: 20 / 36

OPERATION
18
Testing the Blind
Testing the blind with the programming button will allow you to ensure that the motor and
power source are working correctly.
■ ■
Press the programmingl button on the front
side of the headrail to test operation. If the
blind does not operate, see “Troubleshooting”
on page 24.
Using the PowerView
®
Remote
First, activate the remote by pulling both plastic tabs from the back battery compartment.
IMPORTANT: If you have more than one remote, see “Adding Additional Remote(s) to the
PowerView
®
Shade Network” in the PowerView Motorization Remote Control Guide.
Programming
Button
Front of
Blind
Transceiver
Assembly
Group 1
Group 2
OPEN
Tilt slats
to open at
50% position
CLOSE
Tilt slats
to open at
50% position
Group 3
Group 4
Group 5
Group 6
Favorite
(Blind position)
LEFT ARROW
Tilt slats down to
closed position
RIGHT ARROW
Tilt slats up to
closed position
STOP
(Press and hold for
programming mode)