manualshive.com logo in svg

Hunter Douglas PowerView, Installation Operation Care

Looking for a user manual for your PowerDsine PowerView? Look no further! Download the free manual for your PowerDsine PowerView from manualshive.com, where you can easily find and access all the information you need to get the most out of your product.

Share
Download
background image

CONTENTS

GETTING STARTED 

Product View — PowerView

®

 Motorization ....................................................................1

Product View — SimpleLift

™

 with PowerView Motorization...........................................2

Tools and Fasteners Needed ............................................................................................3
Unpack the Blind ...............................................................................................................3

INSTALLATION 

Installation Overview  .......................................................................................................4
STEP 1 — Install the Brackets .........................................................................................4
     Mount the Installation Brackets — Inside or Ceiling Mount .....................................5
     Mount the Installation Brackets — Outside Mount ...................................................7
STEP 2 — Connect the Power Cable..............................................................................10
STEP 3 — Install the Blind .............................................................................................11
STEP 4 — Connect the Power Source, If Applicable .....................................................15

OPERATION

Testing the Blind .............................................................................................................18
Using the PowerView Remote ........................................................................................18
Resetting the Blind (If Necessary) ..................................................................................20
Complete the Installation ...............................................................................................20
Operate the Blind ............................................................................................................23
Troubleshooting ..............................................................................................................24

CARE

Removing the Blind (If Necessary) .................................................................................28
Cleaning Procedures .......................................................................................................28

CHILD SAFETY

Cord Connector ...............................................................................................................29
Reassembly of Cord Connector ......................................................................................29
Cord Cleats......................................................................................................................30

DECLARATIONS

 ............................................................................................................31

WARRANTY

 ......................................................................................................Back Cover

Questions?

 

Call Hunter Douglas Consumer Support at 

1-888-501-8364

.

© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or 

their respective owners. 

Summary of Contents for PowerView





































Reviews:

No comments

Related manuals for PowerView

Eaton xChargeIn A Series Operating Instructions Manual preview
xChargeIn A Series
Brand: Eaton Pages: 350
Zebronics ZEB MW55 User Manual preview
ZEB MW55
Brand: Zebronics Pages: 5
49er Communication PABA1416 User Manual preview
PABA1416
Brand: 49er Communication Pages: 2
iOttie iON Wireless Duo User Manual preview
iON Wireless Duo
Brand: iOttie Pages: 11
Thunder 75P-T6-Multi-Charger Manual preview
75P-T6-Multi-Charger
Brand: Thunder Pages: 37
Digitus DA-10061 Quick Installation Manual preview
DA-10061
Brand: Digitus Pages: 6
Green Gorilla ProLine PowerPack X Owner'S Manual preview
ProLine PowerPack X
Brand: Green Gorilla Pages: 4
Halo2Cloud Pocket Power StarLight 2800 Operating Instructions Manual preview
Pocket Power StarLight 2800
Brand: Halo2Cloud Pages: 10
ANSMANN Digispeed 4 Ultra+ Operating Instructions Manual preview
Digispeed 4 Ultra+
Brand: ANSMANN Pages: 48
DreamGEAR Charging Dock User Manual preview
Charging Dock
Brand: DreamGEAR Pages: 1
Gacell SLH 19C User Manual preview
SLH 19C
Brand: Gacell Pages: 25
Draper BCD12 Instructions Manual preview
BCD12
Brand: Draper Pages: 22
Samlex Europe PSC1600-12-60 Manual preview
PSC1600-12-60
Brand: Samlex Europe Pages: 28
tbs electronics Omnicharge OCD12/12-50 Owner'S Manual preview
Omnicharge OCD12/12-50
Brand: tbs electronics Pages: 91
SWIT S-3822A User Manual preview
S-3822A
Brand: SWIT Pages: 3
LG Chem RESU7H StorEdge Installation Manual preview
RESU7H StorEdge
Brand: LG Chem Pages: 35
Huawei ESS-240V12-7AhBPVBA04 Quick Manual preview
ESS-240V12-7AhBPVBA04
Brand: Huawei Pages: 41
Huawei UPS2000-G Series Quick Installation Manual preview
UPS2000-G Series
Brand: Huawei Pages: 22

Brands by name

Popular brands

Load more brands