INSTALLATION
15
18V DC Power Supply with Daisy-Chain Connections
The daisy-chain feature allows up to three PowerView
®
shadings to be powered by a single 18V
DC power supply. However, each shading can operate independently. The daisy-chain feature is
only available with the 18V DC power supply option.
■
Route the power cables from each shading to the connector, using an extension cable,
if necessary.
■
Plug an extension cable into the connector and plug the cable into the 18V DC power supply.
Two extension cables and two connectors are used for three shadings.
■
Plug the 18V DC power supply into a standard outlet.
Unpack the Wand and Attach to Activation Arm
■
Attach the top of the wand (magnet side) to the
activation arm.
Proceed to “Attach Magnetic Hold-Down Brackets
(Optional)” on page 16 or “Basic Operation” on
page 17.
Power Cable from Shading
Power Cable from Shading
Extension
Cable
Connector
18V DC Power Supply
Magnet
Activation
Arm
