CARE
24
Removing the Shading
■
Fully raise the shading.
■
Disconnect the power source from the power cable at the
back of the shading.
■
Move each lever of the installation brackets to the left to
release the shading.
CAUTION:
A flat blade screwdriver can be used to move
the lever. Be very careful not to tear or damage the fabric.
➤
If the lever is inaccessible or
inoperable, lower the shading until
you can see the underside of the
bracket. Carefully reach a small
flat blade screwdriver behind the
shading to the tab on the bottom
of the bracket between the screw
holes.
➤
Push the tab away from the
shading and pull the headrail to
release it from the bracket.
■
Carefully pull the headrail to completely
remove the shading from the brackets.
Cleaning Procedures
Silhouette
®
and Nantucket
™
Window Shadings are made of 100% polyester, which means they
are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric,
particularly where the vanes meet the facings.
The Palette
®
Fabric-Covered Headrail
■
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water and a mild soap
solution; handle with care as you would any fine fabric.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Forced Air
■
Blow away dirt and debris between the vanes using clean compressed air.
Move the lever to the left
to release the shading.
Top View
Tab
Installation Bracket
Underside of
Bracket
End Cap
