Hunt Graphics IMAGE 410, User Manual

Page: 7 / 29

- 7 -
3
H
INSTALLATION, UNCRATING AND MOVING THE
IMAGE
®
410
Seal recommends that a licensed electrician in
accordance with electrical codes in your area install
power for your laminator. Refer to the Specifications
table. Please fill out the Installation Acceptance sheet
found in your accessory pack and return to Hunt
Graphics. (U.S. only)
Please keep your shipping bolts, nuts, and plates for
possible future moves.
Your laminator is equipped with castors that allow ease in
movement. Fix your laminator in an area with adequate
space. You will need room to feed, receive, and trim
images. Once your laminator is in place, lock the
castors. Always unlock the castors before moving your
laminator.
Place the footswitch in a position that is accessible while
feeding images.
Remove wrapping from the rolls.
*
Warning! Do not use sharp objects to remove the
paper from the rolls.
Plug the laminator into the recommended electrical
outlet.
Push the power button. If you have no power, refer to
Troubleshooting, pages 22,23.