Hunt Graphics IMAGE 410, User Manual

Page: 12 / 29

- 12 -
3
H
Program 5: Floor Graphics. Refer to page 16 for
webbing diagram. Floor Graphics are made by first
creating a decal. Apply a Floor Guard, a special non-slip
durable laminating film, to the face of the print and Floor
Grip 1, a permanent/removable pressure sensitive
adhesive, to the back. This can be done in one pass. Use
a hand roller or squeegee to apply the graphic to a clean
smooth floor.
n
Settings provided are for optimal performance using
Seal’s Floor Guard on the top roller and Seal’s Floor
Grip 1 on the bottom roller.
Top Roll Temperature 95
°
C (200
°
F)
Bottom Roll Temperature Ambient to 45°C (110°F)
Speed 3fpm 1mpm
Program 6: OnePass Display. Refer to page 17 for
mounting diagram. OnePass Displays are created by
taking a printable laminate and sealing it onto foam board
or a rigid board, using the laminator.
n
Settings provided are for optimal performance using
Seal’s OnePass on the top roller.
Top Roll Temperature 110
°
C (230
°
F)
Bottom Roll Temperature Ambient to 45
°
C (110
°
F)
Speed 0.5-1.0fpm 0.2-0.3mpm
Purchasers should individually determine, prior to use, the
suitability of each material for their specific purposes. Hunt
Graphics does not accept liability for risks associated with the
performance of materials in application
.