Humminbird 788c Operation Manual Download

Page: 150 / 193

138

Spot Soundings

Spot Soundings

allows you to display or hide spot

soundings, which are depth measurements shown on the chart.

NOTE:

Spot Soundings are only available with optional-purchase MMC/SD cards.

To change the Spot Soundings setting:

1. Highlight Spot Soundings on the Chart main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Spot Soundings

setting. (Hidden, Visible, Default = Hidden)

Navaids on Bird’s Eye View

Navaids on Bird’s Eye View

allows you to display

or hide additional navigational aids in Bird’s Eye View, such as lights and buoys.

NOTE:

You will see more navigational aids with an optional-purchase MMC/SD card.

To change the Navaids on Bird’s Eye View setting:

1. Highlight Navaids on Bird’s Eye View on the Chart main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Navaids on Bird’s

Eye View setting. (Hidden, Visible, Default = Visible)

Shaded Depth

Shaded Depth

allows you to change the depth

used for shading on the chart views.

To change the Shaded Depth setting:

1. Highlight Shaded Depth on the Chart main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Shaded Depth setting.

(Off, 1 to 180 Feet, or 1 to 60 Meters

[International Units only]

Default = 15 ft, 5 m)

Chart Select

Chart Select

allows you to choose which chart to

use if you have built-in charts or a map card. If you select Auto, your unit will
select a chart automatically.

Chart Menu Tab

Summary of Contents for 788c


































































































































































































Search results

Summary of Contents for 788c

Reviews:

Related manuals for 788c

Brands by name

Popular brands

Humminbird 788c, Operation Manual

Search results

Summary of Contents for 788c

Reviews:

Related manuals for 788c

Brands by name

Popular brands