Humminbird 788c Page 77 Operation Manual Download

Page: 77 / 193

Exporting Navigation Data

You can export all saved Tracks, Waypoints, and Routes from your Fishing
System to an optional-purchase MMC/SD card.

To Export All Navigation Data:

1. Make sure that an optional-purchase MMC/SD card is installed in the slot.

2. Press the MENU key twice to access the Main Menu, then press the

RIGHT Cursor key until the Navigation tab is selected.

3. Press the DOWN Cursor key to highlight Export All Nav Data.

4. Press the RIGHT Cursor key to export all navigation data. The Confirm

dialog box will appear. To confirm export, press the RIGHT Cursor key
once more. To cancel export, press the LEFT Cursor key.

NOTE:

If no MMC card is installed, an error message will be displayed. Insert the MMC

card and try again.

NOTE:

The MMC/SD cards and MMC/SD Card Reader require separate purchases. The

MMC/SD Card Reader accessory can be used in conjunction with your personal
computer to view and organize your exported navigation data. To purchase this
accessory, visit our web site at

www.humminbird.com

or contact our Customer

Resource Center at

1-800-633-1468

Multi-Media Card (MMC)/SD Slot

Summary of Contents for 788c


































































































































































































Search results

Summary of Contents for 788c

Reviews:

Related manuals for 788c

Brands by name

Popular brands

Humminbird 788c, Operation Manual

Search results

Summary of Contents for 788c

Reviews:

Related manuals for 788c

Brands by name

Popular brands