manualshive.com logo in svg

Humminbird 788c, Operation Manual

Share
Download
Humminbird 788c Operation Manual Download Page 117

105

Depth Alarm

Depth Alarm

sounds when the depth becomes

equal to or less than the menu setting. 

To change the Depth Alarm setting:

1.  Highlight Depth Alarm on the Alarms main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Depth Alarm

setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters 

[International Models

only]

, Default = OFF) 

Fish ID Alarm

Fish ID Alarm

sounds when the Fishing System

detects fish that correspond to the alarm setting. Fish ID Alarm will only
sound if Fish ID+™ is on. 

To change the Fish ID Alarm setting:

1.  Highlight Fish ID Alarm on the Alarms main menu.

2.  Press the LEFT or RIGHT Cursor keys to change the Fish ID Alarm

setting. (Off, All, Large/Medium, Large, Default = Off)

Large

Large/Medium

All 

Off

For example, if you've set the Fish ID Alarm to sound for Large fish only, the

Fish ID alarm will sound when a large-sized fish is detected.

Alarms Menu Tab

Summary of Contents for 788c


































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands