Humminbird 788c Page 103 Operation Manual Download

Page: 103 / 193

Cursor to Waypoint

(Chart or Combo View only)

Cursor to Waypoint

allows you to quickly move the cursor to any saved

waypoint so that you can locate it or edit it.

NOTE:

This X-Press™ Menu option only appears if you have saved waypoints.

To move the cursor to a saved waypoint:

1. Highlight Cursor to Waypoint on the Navigation X-Press™ Menu.

2. Press the RIGHT Cursor key to initiate Cursor to Waypoint.

3. Press the UP or DOWN Cursor keys to select a waypoint, then press the

RIGHT Cursor key to select the destination waypoint.

Save Current Track

Save Current Track

allows you to save the current

track being displayed. After the current track is saved, a new current track is
started.

NOTE:

Save Current Track appears on the Navigation X-Press™ Menu after navigation

is stopped.

To Save Current Track:

1. Highlight Save Current Track on the Navigation X-Press™ Menu.

2. Press the RIGHT Cursor key to initiate saving the current track.

3. The Confirm dialog box will appear. To save the current track, press the

RIGHT Cursor key once more. To cancel saving the current track, press
the LEFT Cursor key.

Navigation X-Press™ Menu

Summary of Contents for 788c


































































































































































































Search results

Summary of Contents for 788c

Reviews:

Related manuals for 788c

Brands by name

Popular brands

Humminbird 788c, Operation Manual

Search results

Summary of Contents for 788c

Reviews:

Related manuals for 788c

Brands by name

Popular brands