Humminbird 587ci HD Operation Manual Download

Page: 155 / 176

143

Setup Menu Tab

Depth Offset

(Advanced)

Settings: -10.0 to +10.0 feet, or -3.0 to +3.0 meters
(International Models only); Default = 0

Depth Offset

will adjust the digital depth readout to indicate depth from the

waterline or boat's keel. Enter a positive vertical measurement from the
transducer to the waterline to read the depth from the waterline. Enter a
negative vertical measurement from the transducer to keel to read the depth
from the keel.

Temp. Offset

(Advanced, with Temp/Speed only)

Settings: -10.0 to +10.0 degrees; Default = 0

Temp. Offset

will adjust the temperature readout by the amount entered. This

menu option is available if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once.

Customized Sonar View

Default Sonar View

NOTE:

The availability of the digital readout information corresponds with the

view selected, the accessory attached, and whether or not you are navigating.

Summary of Contents for 587ci HD

















































































































































































Search results

Summary of Contents for 587ci HD

Reviews:

Related manuals for 587ci HD

Brands by name

Popular brands

Humminbird 587ci HD, Operation Manual

Search results

Summary of Contents for 587ci HD

Reviews:

Related manuals for 587ci HD

Brands by name

Popular brands