9
Trolling Motor Mount
3. With the transducer face down and its cables pointed away from you, determine
how the Landscape Mode mount should align with the transducer.
Recommended Configuration:
Align the mount with the hinge on the left for a
Port installation or on the right for a Starboard installation (see the illustration
Positioning the Landscape Mode Mount
).
NOTE:
Your transducer will flip up for landscape mode when installed in the
Recommended Configuration. If you prefer to flip your transducer down for
landscape mode (see the illustration
MEGA Live Views
in
Section 5. Route the
Cable and Connect Power
), use the Optional Configuration.
Optional Configuration:
Align the mount with the hinge on the right for a
Port installation or on the left for a Starboard installation (see the illustration
Positioning the Landscape Mode Mount
).
Hinge on Left
Hinge on Right
Positioning the Landscape Mode Mount
Trolling Motor Mount
2. Install the Landscape Mode Mount
Use the following instructions to install the
Landscape Mode mount onto the transducer.
1. The Landscape Mode mount should be open
for this step of the installation. Unlock the
mount by pressing down on the two release
buttons, and pull the mount open. It will relock
automatically once fully opened.
2. In addition to the requirements listed in the
Prepare for Installation
section, determine if
the transducer will be installed on the left or
right side of the trolling motor.
If the trolling motor stows on the right (starboard) side of the boat,
you will
mount the transducer on the right side of the trolling motor.
If the trolling motor stows on the left (port) side of the boat,
you will mount
the transducer on the left side of the trolling motor.
Port Installation
Starboard Installation
release
buttons
Landscape Mode Mount
