Humminbird 346c DI Operation Manual Download Page 82

Page: 82 / 97

Language

(International only)

Settings: Various, Default = English

Language

selects the display language for menus.

International Models only

Triplog Reset

(w/ Temp/Speed only)

Settings: Press the RIGHT Cursor key and follow screen
instructions.

Triplog Reset

resets the Triplog to zero, and will appear in the menu if a

Temp/Speed Accessory is connected and the paddlewheel has moved at least once.

The Triplog provides the following information: timer for elapsed time, distance
traveled since last reset, and average speed.

NOTE:

See

Views

to find out how to display Triplog information on the screen.

Restore Defaults

Settings: Press the RIGHT Cursor key and follow screen
instructions.

Use this menu choice with caution!

Restore Defaults

resets ALL menu settings to their factory defaults.

Select Views

(Advanced)

Settings: Visible, Hidden; Default = Visible

Select Views

allows you to set the available

views to hidden or visible in the view rotation. The
view will be removed from the view rotation if it is
set to Hidden and will be displayed in the view
rotation if it is set to Visible.

NOTE:

See

Views

for more information.

Setup Menu Tab

Summary of Contents for 346c DI


































































































Search results

Summary of Contents for 346c DI

Reviews:

Related manuals for 346c DI

Brands by name

Popular brands

Humminbird 346c DI, Operation Manual

Search results

Summary of Contents for 346c DI

Reviews:

Related manuals for 346c DI

Brands by name

Popular brands