69
Digital Depth Source
(Advanced, Down Imaging™ models with optional-
purchase transducers only)
Settings: Auto, 2D Element; Default = Auto
Digital Depth Source
specifies the beams that will be used to provide the
depth for the digital depth readouts (see
Views
and
Setup Menu Tab: Select
Readouts
for more information). It is important to set this menu option based
on the transducer that is connected to the control head, as follows:
• If a
Down Imaging™ transducer
is connected to the control head,
select Auto. Depending on the depth, Auto will automatically choose
the 2D conical beams or the Down Imaging™ beams to display depth in
the digital readout window. Auto is the default setting.
• If an
accessory transducer
is connected to the control head, select 2D
Element. For example, if you connect an ice transducer to your Down
Imaging™ unit, change the digital depth source to 2D Element in order
to display depth in the digital readout window. The 2D Element setting
should not be used with a Down Imaging™ transducer.
NOTE:
Visit our Web site at
humminbird.com
to determine which accessory
transducers are compatible with your Humminbird® Fishfinder, or contact our
Customer Resource Center.
NOTE:
When Digital Depth Source is set to 2D Element, the DI Only setting will
be removed from the DI Pings menu. When DI Pings is set to DI Only, the 2D
Element setting will be removed from the Digital Depth Source menu. See
DI
Pings
for more information.
Sonar Menu Tab
