24
System Status
Use System Status to view system connections and
to conduct a unit self-test.
The following screens are displayed in turn
when you press the VIEW button when using
System Status:
• Self Test
• Accessory Test.
Self Test
displays results from the internal diagnostic self test, including unit serial
number, Printed Circuit Board (PCB) serial number, software revision, total hours of
operation and the input voltage.
Accessory Test
lists the accessories connected to
the system.
NOTE:
The speed accessory will be detected only if the
paddlewheel has moved since your 300 Series™ Fishing
System was powered up.
Exit System Status by powering your Fishing System off.
System Status Accessory Test Screen
System Status Self Test Screen
Simulator
Use the Simulator to learn how to use your 300 Series™ Fishing System before taking
your boat on the water. The Simulator is a very powerful tool that simulates on the
water operation, providing a randomly-updated display. We recommend going
through this manual while using the Simulator, since all of the menus function and
affect the display the way they actually do when in Normal operation.
NOTE:
To get the full benefit of the Simulator, it is important to select Simulator manually
from the Start-Up Options menu as opposed to letting the Fishing System enter Simulator
automatically (as it will if a transducer is not connected and you do nothing during power
up). Manually selecting Simulator from the Start-Up Options menu allows you to pre-
configure your 300 Series™ Fishing System for on the water operation. Any menu
changes you make will be saved for later use.
A message will appear on the display periodically
to remind you that you are using the Simulator.
Exit the Simulator by powering your Fishing
System off.
Simulator
23
531447-1_A_343c_Eng.qxd 11/11/2005 9:18 PM Page 28
www.Busse-Yachtshop.de email: [email protected]
