Humminbird 1158? combo Product Manual Download Page 71

Page: 71 / 232

Export Navigation Data

You can export all saved tracks, waypoints, and routes from your Fishing System to an optional-
purchase SD memory card.

To export all navigation data:

1. Make sure that an optional-purchase SD memory card is installed in the slot.

2. Press the MENU key twice to access the Main Menu, then press the RIGHT Cursor key

until the Navigation tab is selected.

3. Highlight Export All Nav Data and press the RIGHT Cursor key. The Confirm dialog box

will appear. To confirm export, press the RIGHT Cursor key once more. To cancel export,
press the LEFT Cursor key.

NOTE:

If an SD memory card is not installed, an error message will be displayed. Insert the SD memory card

and try again.

NOTE:

The SD memory cards and USB Memory Card Reader require separate purchases. The USB Memory

Card Reader accessory can be used in conjunction with your personal computer to view and organize your
exported navigation data. To purchase this accessory, visit our Web site at

humminbird.com

or contact our

Customer Resource Center at

1-800-633-1468

SD Card Slots

Summary of Contents for 1158? combo









































































































































































































































Search results

Summary of Contents for 1158? combo

Reviews:

Related manuals for 1158? combo

Brands by name

Popular brands

Humminbird 1158? combo, Product Manual

Search results

Summary of Contents for 1158? combo

Reviews:

Related manuals for 1158? combo

Brands by name

Popular brands